SLOVIC® Tripod Mount Adapter| Tripod Mobile Holder|Tripod Phone Mount| Smartphone Clip Clipper 360 Degree for Taking Magic Video Shots & Pictures.
We don't know when or if this item will be back in stock.
- TRIPOD PHONE MOUNT 360 ° SWIVLE ADJUSTING TO YOUR NEED:- This tripod mount holder has a 360 degree rotation to its frame which enables you to record any audio or video footage at any angle in portrait mode or landscape mode you want without needing you to change the angle of your gorilla tripod stand!
- NO NEED FOR TRIPOD STAND TO HOLD YOUR I PHONE OR SMARTPHONE:- This mini tripod adapter can hold your iphone or smart phone without you having to use a gorilla tripod to mount the holder on top as this holder mount has an extended section that you can hold and record your vlogs or take pictures with ease.
- SET AT AN ANGLE AND FORGET THANKS TO A BACK SIDE SCREW:- This tripod bracket mount contains a screw on back side which helps you set your mobile phone at an angle you want and once you tighten the screw you don’t need to think about the holding strength of the screw in that position. It just simply does with ease thanks to the high quality steel and setting of the screw!
- CAN ACCOMMODATE YOUR SMARTPHONES AND IPHONES THAT HAVE WIDTHS UPTO 110mm:-Most Tripod holders only stretch up to 82 mm at max while this tripod holder can stretch up to 110 mm which can accommodate big mobiles as well!
- SMOOTH AND SOFT PADDING ON BOTH THE EDGES:- No need to worry about your smart phone edges getting damaged nor will your mobile phone spring out of the holder thanks to the screw that holds the mobile tight and protects it at all costs! So click the BUY NOW button and leave all the mobile mounting worries behind!
Have a question?
Find answers in product info, Q&As, reviews
Your question may be answered by sellers, manufacturers, or customers who purchased this item, who are all part of the Amazon community.
Please make sure that you've entered a valid question. You can edit your question or post anyway.
Please enter a question.
Imagine riding your bike with the tripod on which your mobile phone is mount on this Sturdy SLOVIC Mobile Holder where you can focus on riding and gaining joyful experience rather than constantly looking at your smart phone worrying about dropping your mobile!
This tripod mount is made of strong ABS plastic material but with high quality finishing which will ensure that it won’t succumb to deformation under any normal circumstances unlike the most mobile holders budge under even small forces.
MAKE YOUR CELL PHONE PHOTOGRAPHY STAND OUT!
Get the best phone tripod mount so you can just concentrate on making the best content!
When you are creating great content, the last thing you need to worry about is your equipment.
This 360 degree tripod mount does everything while providing durability and reliability for your photography and cinematography that it deserves!
Produce crisp shots with minimal movement, thanks to the Strong and Stable Base.
- Durable and Sturdy.
- Easy to install on tripod stand.
- Strong adjustable knob VS unreliable spring clamps.
- Fits any size mobile, with or without a thick phone case.
HIGHLY DURABLE/ COMPACT
More Useful than UNIVERSAL MOBILE HOLDER loaded with springs!
DOUBLE SILICA GEL PAD
Protect your smartphone from scratches.
Foam padding on the interior side and silica gel pads on the top and bottom of the holder.
Protective rubber grips hold your phone firmly in place while providing protective padding.
360 DEGREE ROTATION, GO FROM LANDSCAPE TO PORTRAIT WITH EASE
Multi angle adjustment and optimization angle of view.
While other mounts require you to remove your phone and readjust the grip to switch from landscape to portrait mode, the SLOVIC phone holder can easily be adjusted with the turn of a knob!
Independent Parts - Use together or apart.
A phone tripod mount this easy and convenient to use is an awesome tool for anyone.
COMPATIBLE WITH ALL DEVICES
Easily adjust the SLOVIC phone holder anywhere between 2.3” up to 4.1”, more than wide enough to fit any phone, whether it’s an iPhone X or Galaxy Note 9, with or without a case.
Review this product
Read reviews that mention
There was a problem filtering reviews right now. Please try again later.
But to extract the best out of mobile photography, one must manage the shakes as most do not come with optical stabilization, while digital stabilization works only up to a limit.
Here comes the necessity for tripod or monopod mobile holders. Tripods/monopods are available in various sizes where some are small enough to carry in the pockets. Along with mobile holder, they cover the major issue with mobile photography. So getting one is always recommended.
I was too looking for a holder for the same reasons. There are many in the market with different designs and quality starting from a mere Rs 50. But again, as i say, with cost comes quality & durability.
▶ Assembled Mobile holder (4 pieces when disassembled)
1. Sturdy reinforced design along with the use of good quality materials. Brass nuts are used at all 4 locations. The screw is a normal one.
2. Three-way mounting support for tripod or monopod. (check pics)
3. Screw based holder ensures a tight grip at all times. Cheap one comes with spring arrangement which is always risky & even tends to loose with time resulting in slippage of mobiles.
3. It can even be used directly without a tripod or monopod, by simply holding the base for vlogs, selfies, etc.
4. Portrait, landscape or even any desired angle can be set for mobile, even if your pod does not have an arrangement for the same. As some pods come with ball arrangement & dont have pan/tilt facility.
5. Holder arrangement comes with rubber pads to provide proper grip and prevent damage to the sides of the mobile.
6. Compatible with almost all smartphone sizes. It can accommodate devices with a width range of 60mm to 105mm without any issue. Beyond 105 mm screw comes out.
7. It comes with large base and is properly balanced. So can be simply used to stabilize mobile on a flat surface for pics & videos.
* Wherever possible i have demonstrated the thing in the attached pics.
1. The only thing i am missing here is good quality screw. As it came out of the box with some rust. So some oiling will need to be done.
▶ One star deducted for this issue. So ★★★★ device.
Apply a small amount of oil or grease on the screw & sliders, to smoothen the holder extender movement and enhance the life of the screw.
▶ All in all, this is a good quality mobile holder that addresses many flaws in other holder designs. So it's highly recommended for the price range.
My suggestion would be to avoid cheaper ones, & especially with stretch and hold type designs.
▶ There's another similar design (Ulanzi st-25) with all premiums, full CNC metal construction, and horseshoe support, but it comes for triple the price. (~1.5k). So those looking for such things can go for it.
Those old holders don't hold the phone at all.
So I got this tripod holder and works wonders, doesn't slip out and I can change the angle at which I want to keep the mobile.
Holder comes with two sturdy knobs, which makes you feel safe about the phone, which isn’t the case with spring ones.
1) Holder won’t damage the sides of the phone.
2) Ergonomics prevent phone from falling down; peace of mind.
3) knobs are reliable, seems like a good plastic and holds well.
4) for the price range, I feel it’s a very good holder for your normal and expensive phone.
5) Screw that fixates to the tripod is sturdy too and it’s not going to give up on you anytime soon. However, I would have loved to see some innovation there to feel like it won’t rip/fall off.
So sturdiness - Yes
Durability - Using since a month, and I know it will last long. So, Yes.
Value for money - Subjective. If peace of mind you’re looking for, then Yes!
Quality of plastic - Definitely Yes.
Fixing angle - phone can be rotatable 360 degrees in 2d axis (x and y), to cover 3D 360 (x, y and z), you need to turn tripod or buy a ball joint.
Conclusion: Can’t get a better one for 449/-
For those who feel their tripod base screw head is just too big to fit this.. you should look at the camera mount plate which is detachable. That plate will have smaller screw head which should fit this stand. It took me a minute to remove the camera detachable mount and fit it to this stand and another minute to fit my phone on to this adapter. For quick mount, buy another detachable mount for this adapter. Good Luck
Another advantage of this holder is that it can be used " as is ", meaning it can hold the phone on any flat surface without needing a tripod, though it is also able to use any size of tripod as a mounting threaded hole is provided. All in all, excellent value for money.
Bottom screw is slightly on the edge.
Note to manufacturers:
If it in middle, then it will be fine.
Moving part holder is not tight and sturdy enough. Little bit shaking is there. Kindly fix this issue.