Top Rated in 3D Printing Materials

Compare the most helpful customer reviews of the best rated products in our 3D Printing Materials store. These products are shortlisted based on the overall star rating and the number of customer reviews received by each product in the store, and are refreshed regularly.

Top rated products in 3D Printing Materials

product price Fulfilled FREE Delivery on orders over ₹ 499.00 . Details
4.4 | 234 customer ratings
83% of the ratings are 4-stars or 5-stars
The product is same as mentioned as in pictures and description. They sent me some extra rolls in the pack. :
        Read more
By PSYNTIST
Filaments received 20.

Metallic colours - Bronze, copper and gold. Silver Missing. Some weird metallic white substituted for it.

The rest of the colours are not all solid colours, some filaments are translucent.

Colours missing as from the product image - Red, Flourescent red, grey.

Colours
        Read more
By Partha
The pen stopped working just after 7 days of use. The PLA filaments got stuck inside & got totally melted & jammed the nozzle. In spite of getting the filaments out, cleaning the nozzle, the pen was not able to function. DO NOT BUY AT ANY COST. IT'S A WORTHLESS PRODUCT. Better to go for the expensive branded
        Read more
By Suman B.
product price Fulfilled FREE Delivery. Details
4.1 | 262 customer ratings
77% of the ratings are 4-stars or 5-stars
Nicely vacuum packed. Does have good strength as it did not break while hanging from spool to printer. Though recommended temperature for printing is 190-210., it did have problem in adhesion which was resolved by bringing bed very slightly close to nozzle and increasing extruder temperature for first layer to 205. Now perfect adhesion. I
        Read more
By Himanshu Patel
Good Tangle free

packing is good, but it could have been better. when i opened the box and saw the PLA it was not was not vacuum sealed, there was a little tear to the packing cover i was little worried PLA may break while printing. in transportation it occurred i think. i shocked by looking at the quality of the print it was
        Read more
By Abhiram
I consumed whole spool and faced problem with nozzle jam, it creates bulb like formation in nozzle and jam it. so almost for every print I had to pull it back and remove the clog that was visible for in print. After a lot of adjusments in printer i still faced it, So i read about spool thickness and measured it. And yes it varied. A
        Read more
By Amie
product price Fulfilled FREE Delivery. Details
4.4 | 25 customer ratings
84% of the ratings are 4-stars or 5-stars
One of the best PETG filament I used.
It printed well at 140c nozzle and 65c bed temperature .

Parts printed were very strong compared to pla

Overall very much happy with the
        Read more
By Hari K.
This is the second spool i'm getting from Tesseract. First was PLA and now PETG. Both spools came with punctured vacuum seals. With PETG, I could literally hear small pops and see telltale signs of steam bubbles on the extruded filament. This is certainly not a good thing. The prints are coming okyish with PETG while the PLA spool works
        Read more
By Arun P.
After using this filament for about a month I'm writing this eview.

The spool is not vacuum packed although the seller claims to be so but has a desiccant inside which will not sever it's purpose in case of extremely moisture product like 3D printing filament.
As a result when I started printing the parts using this
        Read more
By Mridul Pandey
product price Fulfilled FREE Delivery. Details
4.3 | 26 customer ratings
79% of the ratings are 4-stars or 5-stars
Good filament. I do recommend it for anyone looking for this type of
        Read more
By Michael S.
I got the wrong colour (white), but since had urgent stuff to make didn't return it. The PLA is not branded but some generic stuff (I expected that). The material quality is okay too with decent print quality. It tends to jam the nozzle a lot
        Read more
By Vaibhav
Hydrolysis has excessively degraded the filament because of moisture impregnation for long time. This is irreversible and degrades the polymer.

When I opened the package, the filament was already very brittle and it would break after every 3-4 minutes.

After that I decided to dry the filament in conventional oven
        Read more
By Jagermister
product price Fulfilled FREE Delivery. Details
4.1 | 36 customer ratings
76% of the ratings are 4-stars or 5-stars
Successful Prints on ender3
        Read more
By Amazon Customer
Hi,

The roll that came was not translucent. It was just blue. Image and representation is incorrect. I thought it would be translucent after printing. But its not. Will try to get a
        Read more
By Amazon Customer
Ordered red 2 times got orangeish filament always
sent it back once and got the same product again

Price changed daily not sure. Keep track and wait for it to drop to save a couple of
        Read more
By rohit
product price Fulfilled FREE Delivery. Details
4.3 | 14 customer ratings
87% of the ratings are 4-stars or 5-stars
We have been using this material since 1.5 years , and continued since then. Material quality is good no lumps or air bubbles.
The colour is as shown and have good finished look after
        Read more
By Amazon Customer
Great PLA filament. Arrived in good packaging. No damage what so ever. 3D printing turned out really nice. Good with melting temp between 190-210 degrees. Sharing some pictures as the sample. Highly recommended for the price. Really happy with the
        Read more
By Prem Kumar
Nice material. Good finish. Glossy and tough. Only problem with the material is that it doesn’t stick well to the bed
        Read more
By Anonymous
product price Fulfilled FREE Delivery. Details
4.0 | 38 customer ratings
69% of the ratings are 4-stars or 5-stars
Finally got exceptional quality filament that works flawlessly with my Creality and Flashforge FDM printers;

1. It got delivered very fast in less than 24 hours which was amazing!

2. The filament is properly sealed with dessicant.

3. It sticks very good with the bed temperature set at 60 degrees
        Read more
By Shane Alam
Great product
Filament has good strength and quality as
        Read more
By Anoop Mahobia
By VAIBHAV
product price Fulfilled FREE Delivery. Details
3.9 | 69 customer ratings
71% of the ratings are 4-stars or 5-stars
Just like all abs it will warp. 3 test prints failed. 1st got detached on 4th layer when part cooling started. Second got warped and detached at bed temperature 80°C. 3rd warped at bed temperature 90°C. Finally got good print at 100°C. Printed part is really durable and good looking. So in a nutshell unlike PLA print hot and print
        Read more
By Himanshu Patel
Awesome quality product. Its so strong.

Recommended for prints that need high strength.

Printed many products with this filament.

Bed adhesion is great. No irregularities btw the layers.

Gives a perfect print. Ordered more of this.

HIGHLY
        Read more
By ANJITH PHILIP JOSE
Although the price us attractive but it is not tangle free. So be sure that this would get tangled and the printing will get disrupted and hence leading to lots of wastage. Hence the price in effect is not low but high due to wastage. One can always argue that u can use the remainder for other project but the hassle is too
        Read more
By Ady
product price Fulfilled FREE Delivery. Details
5.0 | 5 customer ratings
100% of the ratings are 4-stars or 5-stars
I used this filament to print some parts on Flashforge Creator pro. I like the outcome. Cant
        Read more
By 3haWin
the product quality is good and the prints are really
        Read more
By mukesh
Very nice
        Read more
By Arjun singh
product price Fulfilled FREE Delivery. Details
4.1 | 18 customer ratings
81% of the ratings are 4-stars or 5-stars
It’s a very unusual roll. Has a very small central hole and does not fit in my low resistance holder which has a 46 mm diameter and the sides are made of card board. And the filament itself shreds quite a bit on my direct drive extruder, I do use retract at 40mm/s and .8mm distance but I expected the filament to hold up a little better.
        Read more
By Daniel Naveen K
Comes in a Vaccum Sealed package.
Rs. 1000 for 1KG ABS is the best deal you can get
        Read more
By Saurabh R.
Worked well on my ender 3 with few custom settings. I used 0.8mm nozzle for faster prints so the print in the photo has less
        Read more
By Sajeesh Kiliyani
4.0 | 20 customer ratings
72% of the ratings are 4-stars or 5-stars
Easy to use and good quality
        Read more
By Anuj Shrivastava
Very good colors and nice packing. Will order more thank
        Read more
By Amit Vohra
The filament strings were broken when arrived all of it were damaged and shattered into multiple pieces i was so upset that i did not even take photos before returning
        Read more
By Puskar Karmakar
product price Fulfilled FREE Delivery. Details
4.0 | 20 customer ratings
79% of the ratings are 4-stars or 5-stars
Filament is good, printed parts are shiny and strong,
Recommended temp settings 230 for first layer, 225 for other layers.

60 degrees for heated
        Read more
By karthi
Good quality product, the strength and flexibility of printed parts are very
        Read more
By Vipin J
Spent a long time before writting this review, the whole roll can in with moisture, at any temp recommend it makes pop sounds and I have checked for any potential issue but it is moisture. All my parts were supposed to be functional but they are super Brittle, don't adhere and cause weak parts altogether. Better use pla than this roll of
        Read more
By Shraddha R.
product price Fulfilled FREE Delivery. Details
4.0 | 18 customer ratings
72% of the ratings are 4-stars or 5-stars
printing
        Read more
By Aditya Grover
good
        Read more
By Arumuga R.
Very worst printing quality.the filament is breaking
        Read more
By Santhosh
4.6 | 5 customer ratings
100% of the ratings are 4-stars or 5-stars
Works perfectly and are as
        Read more
By Robert Petersson
Filament is very good and build strength is also
        Read more
By Deven
Printed well.
Good
        Read more
By SAM JAGTAP
product price FREE Delivery. Details
3.8 | 21 customer ratings
64% of the ratings are 4-stars or 5-stars
I had really bad experience with WOL3D who are selling a nasty filament which is becomes brittle in no time.

This one is a better PLA blend which doesn't have that issue, it's also more uniform than WOL3D.

If you are reading this, please don't waste your money on WOL3D PLA
        Read more
By Jagermister
The quality of the filament is good compare to other brands at reasonable price. The filament comes in well packed box.

I am attaching some of the models printed using these
        Read more
By Albin George
I have mixed feelings about this brand, I ordered 2 filaments from them. The white pla came first and was amazing. Not brittle,. Smooth prints no issues whatsoever. Still using it today. The black however gave problems right from the start, not sticking to the build plate and ultimately clogged my nozzle and had to rechange the nozzle.
        Read more
By Blossom
product price FREE Delivery. Details
4.0 | 8 customer ratings
83% of the ratings are 4-stars or 5-stars
Best quality product available in market (HIGHLY
        Read more
By kamraan p.
The colours were not the same as shown in the picture..there was pink and green also..totally useful and easy to handle cause it comes in a
        Read more
By Always true
3 in 5 keeps
        Read more
By Rahul
product price + ₹ 99.00 Delivery charge Details
3.8 | 13 customer ratings
63% of the ratings are 4-stars or 5-stars
Extremely good for the price!
I've used PLA of other vendors which used to cost few hunderd more than this, still this one being PLA+, gave extremely strong prints. I didn't face any stringing nor any issues with bed adhesion.
I print at around 200°C with bed at 50°C on my Ender3.
Will post here if I face any long term
        Read more
By Guruprakash
It's great to have a cheaper option.
Cheaper but still good
        Read more
By YouGiveLoveAbadName
Waste of electricity.. totally worst... Not stocked even in bed temp turns
        Read more
By Anurag Kumar
product price + ₹ 99.00 Delivery charge Details
3.8 | 9 customer ratings
63% of the ratings are 4-stars or 5-stars
Not sure if this is pla+ with enhanced strength as I haven’t tested it but it works well. It looks matte in the roll but becomes glossy once printed. I do print most PLAs on the hotter end (210c) and so far no issues. And the blue colour is really
        Read more
By Daniel Naveen K
I am using this filament for the first time...I have tried different filaments for the past few years.....only very few were exceptional. .. I should say this is one of
        Read more
By NIJU THOMAS
Waste of electricity.. totally worst... Not stocked even in bed temp turns
        Read more
By Anurag Kumar
product price Fulfilled FREE Delivery. Details
3.8 | 9 customer ratings
64% of the ratings are 4-stars or 5-stars
I have ordered black one this time and initial prints are looking great. I've ordered some 5-6 different filament till now from them, all turned out great. Even after using the filament kept for several months, the print still coming out
        Read more
By Amir Ali
Only 800 g to 850g filament. Not 1 kg filament Good print at first after open the 3 days it becomes poor quality u need to print all at
        Read more
By karthick
Melts at 220 degree only not pla filament breaks in middle of the
        Read more
By Amazon Customer
product price Fulfilled FREE Delivery. Details
3.8 | 8 customer ratings
69% of the ratings are 4-stars or 5-stars
Fantastic quality prints. Didn't expect such nice silky finish. I thought it was just a marketing gimmick, but it is not. It prints with ease with no issues. Go for it even if you don't care of
        Read more
By Pavan Kumar Kaushik
Good product. Quality is good. Package is good. Cost also
        Read more
By AADHEESHWARAN
I am fan of WOL filaments, but this time its just disappointing. Just see the pictures and it can be seen. One of those pictures shoes earlier bought filament and the recent one. Too much difference in the
        Read more
By Pradeep